#Application type for port forwarding soulseekqt password#
Unless you've previously changed it, you'll find the default password on your Hub settings card on the back of your Hub If you have no clue what this means then you can try ticking the options 'Use UPnP port mapping' and 'Use NAT-PMP port mapping'. Open a new web browser on your connected device and type 192.168.1.254 into the address bar. Forward (re-direct) the port you use for Soulseek (for example 6234) from your router to your port 6234 on your PC (which has local LAN address).Select the protocol appropriate to the rule you are adding, and click Set.
The default external and internal port that is used for HTTP webserver is port 80, this may vary depending on how you’re set up. You will need to check the documentation provided from the hardware manufacturer, software/service provider or contact your IT support to identify the port range Enter the external and internal port number range.Choose from the available devices and click Set.Select the device you want the port forwarding rule to apply to.Enter a name for the port forwarding rule you want to set up (for example, 'My webserver').Click "Create a new port forwarding rule".If you have changed it and now forgotten it, you can use the password override feature by click on Help to set up a new password without losing all your personal Hub settings and configuration. Unless you've previously changed it, you'll find the default password on your Hub settings card on the back of your Hub. Open a new web browser on a device connected to your Hub and type 192.168.1.254 in the address bar.
0 kommentar(er)
